Product Introduction:
The biomass burner realizes the conversion of forest waste and biomass waste into high-quality gas for pollution-free discharge, protects limited fossil resources, and is a device that makes full use of renewable energy, in line with the trend of energy saving and emission reduction in the world, especially in developing countries. .
The biomass burner is a biomass gasification combustion automatic control machine that performs high temperature pyrolysis of biomass in a combustion engine.
Product Features:
1. Long service life: our machine biomass gasification indoor bravery is to use a 1 # super refractory casting molding, no seams, and a unique manufacturing process, resistant to high temperature over 2000 degrees, and it has high hardness, resistance to erosion, the working life of more than five years, if cooperate with water-cooled design, the service life of up to 15 years.
2. High thermal efficiency and sufficient output:
A. because our gasification chamber is made of unique 1# high-temperature resistant materials, it can ensure that the gasification chamber can be used at high temperature for a long time. So no water is needed to cool the gasification chamber. Reduce heat loss. Therefore, the thermal efficiency is greatly improved. And the liner is a one-time pouring molding, no seams, so that the heat loss to minimize. In addition, the heat preservation effect of combustion machine is very good, and greatly reduce the heat loss.
B. unique boiling semi-gasification combustion mode makes fuel combustion more complete. More quickly.
C. our company follows the principle of thermal energy design, and can completely reach or exceed the rated heat production of the equipment in the combustion design and production. The output.
3. High degree of automation: the automatic control panel developed by our company enables the biomass combustion machine to operate with one key, which is convenient and does not require special care. The combustion engine size conversion function can meet the user's different fire demand. And no safety hazards, low failure rate, good stability.
4. Safety: our company has independently developed semi-automatic or full-automatic material separation valve, which can cut off the connection between the material box and the gasification room and completely isolate the fuel channel when the combustion machine is short of materials and stops the furnace. Play the role of air isolation, and then with the design of closed material box, there is no risk of tempering.
5. Unique appearance design: the overall design is neat and beautiful. And has a special maintenance door, maintenance is quite convenient.
6. Energy conservation and environmental protection: the most important feature of biomass combustion machine is low operating cost, no pollution, environmental protection benefits. No black smoke emission. Sulfur dioxide and carbon oxide are almost zero, and flue gas can achieve dust-free emission after dust removal.
Scope of application of biomass burner
Chemical and pharmaceutical: Manufacture and dry.
Painting industry: bake coating solidified spray.
Textile, printing, dyeing, non woven enterprises: heat setting, thermosol dyeing, bake, hot air stenter.
Foundry industry: dry welding rod and solder.
Building material industry: dry wood 、wood-based panel 、laminates 、plasterboard 、 glass fiber product.
Abrasives industry: dry grinding wheel &thermal insulation material 、fiberglass、 aluminosilicate fiber、FBT etc.
Agriculture products and food industry: bake/dry coffee 、tea tobacco 、vegetable 、grain 、noodles 、seafood 、bean etc.
Heating engineering: heating for factory, civil building, etc.
